Oriented Strand Board (also known as “OSB” and “waferboard”) is a verstile, structural panel than can be used in many construction applications. The primary uses in single family home building are roof sheathing and wall sheathing, and can be used as a substitute for plywood in almost any construction application.

#2 Common Spruce

Gypsum board is a wallboard or ceiling covering material for use in new building construction or renovation work. It is designed for direct attachment (screws, nails or adhesive) to wood and metal framing or existing surfaces. It may also be used as a covering material for flat or curved structures; the material may be formed to a curve with a short radius.

[174]

“Stretch” Gypsum board is a wallboard that is ideal where the ceiling height is 9′. Two sheets stacked edge-to-edge add to exactly 9′/ It is designed for direct attachment (screws, nails or adhesive) to wood and metal framing or existing surfaces.

These elegant Masonite hardboard two panel Classique doors are currently our best selling style style for residential contruction in the Atlanta-Athens Georgia area.  Our door shop can pre-hang these interior doors in units with 4-9/16″ jambs for 2×4 walls or 6-9/16″ jambs for 2×6 walls, with your choice of hinge color and casing profile.

	Available in standard 6’8″, 7’0″ and 8’0″ passage and bifold sizes. Most sizes can be specified for either hollow or solid core construction and with either finger-joint or MDF stiles and rails.
	Pine wood grain texture or smooth finish.
	Available in 25-, 45- and 60-minute fire ratings.
	All doors are available primed and ready to paint.

Stock – Two Panel Arched Top Classique Hardboard Hollow Core Interior Doors

• 1/0 x 6/8
  • 1/3 x 6/8
  • 1/4 x 6/8
  • 1/6 x 6/8
  • 1/8 x 6/8
  • 2/0 x 6/8
  • 2/4 x 6/8
  • 2/6 x 6/8
  • 2/8 x 6/8
  • 2/10 x 6/8
  • 3/0 x 6/8

Our low maintenance Exterior PVC trim boards are smooth on all 4 sides.  They will not rot or warp, and can give your home a perfect, finished look on the outside.

These low maintenance Exterior PVC trim boards are perfect for replacing rotted corner boards.  They will not rot or warp, and can give your home a perfect, finished look on the outside. 

DensGlass® shaftliner holds up well on job sites both before and after a building is closed in. The shaft wall shaft liner panel consists of a moisture-resistant, noncombustible (as described and tested in accordance with ASTM E 136) 1″ gypsum core with coated glass-mat facings. It resists the growth of mold that can occur with regular shaftwall panels as a result of exposure to normal weather during construction.
DensGlass shaftliner exceeds building codes. It is a Type X panel that meets fire-resistance requirements in shaftwall, stairwell and area separation wall assemblies.

DensGlass shaft wall shaftliner is backed by a 12-Month Weather Exposure Limited Warranty. Superior moisture performance significantly reduces or eliminates callbacks due to moisture-related problems.
For information about how building with Dens™ Brand non-paper-faced gypsum panels can can allow contractors more latitude in scheduling and more options for closing in a structure, faster, visit gpdens.com.

When tested, as manufactured, in accordance with ASTM D 3273, DensGlass Shaftliner score a 10, the highest level of performance for mold resistance under the ASTM D 3273 test method.
The score of 10, in the ASTM D 3273 test, indicates no mold growth in a 4-week controlled laboratory test. The mold resistance of any building product when used in actual job site conditions may not produce the same results as were achieved in the controlled, laboratory setting. No material can be considered mold proof. When properly used with good design, handling and construction practices, non-paper-faced DensGlass® Shaftliner panels provide increased mold resistance compared to standard paper-faced wallboard products.

Primary applications include: Casing, Finish, Trim, Moulding, Base & Cabinets.

This low maintenance 5″ PVC Crown Moulding is the ideal product to use for cornice applications.  PVC Crown Moulding will not rot or warp, and can give your home a perfect, finished look on the outside.

Western red cedar lumber

is a beautiful and functional wood for indoor and outdoor use. It is very popular for outdoor structures and furniture, it is naturally resistant to insects and decay. Visit the Western Red Cedar Lumber Association for more information.

Western Red Cedar’s natural resistance to insects and decay makes it an excellent choice for construction in the Atlanta-Athens Georgia Area. Use these beautiful and functional Cedar Timbers for garden structures and decks, and add extra appeal to your home. Natural, untreated Cedar 4×4’s can also be used for indoor as well as outdoor furniture.